Chepstow & Inland Training Quarries

Overview & Topography

Chepstow & Inland Training Quarries is one of the premier dive sites in the UK & Cold Water region, characterized by a depth profile spanning 6–80m with a maximum bottom depth of 80 metres. Access is typically conducted via Slipway / Pontoon Entry, experiencing zero (inland freshwater quarry) current conditions.

The underwater landscape presents a dynamic blend of high-profile reef structures, sand channels, and dramatic drop-offs that support high biodiversity and clear waters.

Detailed Dive Route & Navigation Plan

1. Entry & Descent Phase (Surface to 12m)

• Descent Strategy: Following the pre-dive briefing, divers execute a controlled descent via the vessel mooring line or a negative back-roll to prevent surface drift.
• Equalization Protocol: Equalize early and often (every 1 metre) within the first 10 metres of the water column to protect eardrums against rapid pressure increases.
• Initial Orientation: Settle neutrally above the sandy substrate at 10m. Set your compass heading and confirm buddy positioning before proceeding towards the main reef structure.

2. Deep Section & Exploration (14m to 80m)

• The Main Reef & Drop-Off: Follow the natural contours of the reef, keeping the main coral wall or rock structure on your left/right shoulder as dictated by the current.
• Key Geological Features: Explore the deep swim-throughs, overhangs, and coral bommies that characterize Chepstow & Inland Training Quarries. Keep an eye on your dive computer: as you reach depths of 30m, your No-Decompression Limit (NDL) will reduce rapidly.
• Turnaround Pressure: Initiate the return leg or ascend to shallower depths when the first buddy in the team reaches 110 bar (or one-third of total cylinder capacity).

3. Shallow Progression & 5m Safety Stop

• Gradual Ascent: Ascend slowly along the reef crest at a rate no faster than 9–10 metres per minute.
• The Safety Stop: Conduct a mandatory 3-to-5-minute safety stop at 5 metres (15 feet) in calm water or along the mooring line before completing a 360-degree surface scan and surfacing with a deployed Surface Marker Buoy (SMB).

Marine Life & Habitat Zones (Biologically Verified)

• Apex & Pelagic Predators: Atlantic Grey Seals (Halichoerus grypus), Basking Sharks (Cetorhinus maximus), Spiny Dogfish (Squalus acanthias).
• Reef Fish & Keystone Species: Conger Eels (Conger conger), Atlantic Wolffish (Anarhichas lupus), Ballan Wrasse (Labrus bergylta).
• Macro Biodiversity & Benthic Invertebrates: Tompot Blennies (Parablennius gattorugine), Yarrells Blennies, Nudibranchs (Coryphella lineata), Spiny Seahorses (Hippocampus guttulatus).
• Elasmobranchs & Marine Reptiles: Dead Mans Fingers (Alcyonium digitatum), Plumose Anemones (Metridium senile), Edible Crabs (Cancer pagurus), European Lobsters (Homarus gammarus).

Gas Management & Diver Safety (The Craig Rule)

• Mandatory Certification Level: Open Water to 18m / Advanced to 30m / Tech >40m. Divers certified to Open Water level (18m limit) must strictly remain on the upper reef plateau and MUST NOT descend past 18m without an instructor or Advanced Open Water certification.
• Gas Planning: Standard 12-litre (80 cu ft) aluminum or steel cylinders filled with Air (21% O2) or Enriched Air (Nitrox 32%). On Nitrox 32%, the Maximum Operating Depth (MOD) is 33.8m at a maximum PPO2 of 1.4 bar.
• Emergency Protocols: In the event of buddy separation, search for 1 minute while hovering in place, then ascend safely at 9m/min to reunite at the surface.